About Truck Explorer
Truck Explorer® is a unique tool on the market for special operations on MERCEDES, MAN, IVECO, Freightliner, MAZ, KAMAZ, CLAAS, PONSSE, UNIMOG and other trucks, buses and industrial machines. It allows to read/write...
Truck Explorer® is a unique tool on the market for special operations on MERCEDES, MAN, IVECO, Freightliner, MAZ, KAMAZ, CLAAS, PONSSE, UNIMOG and other trucks, buses and industrial machines. It allows to read/write memory (FLASH/EEPROM) of ECUs, make IMMO OFF operation, program new keys, calculate special access codes (VeDoc X1, X2, X8; FDOK XT, XN etc.).
Most of operations can be easily done via OBD port without any ECU disassembling or soldering works. This feature makes Truck Explorer® a must-have tool for independent truck repair workshops and chiptuning service providers.
WARNING: External VEI® (Vehicle Explorer Interface®) device V6 and special license are required to run this software. Please visit www.autovei.com or www.truckexplorer.pro to obtain them.
For different vehicles brands we offer additional accessories and software licenses.
Previous Versions
Here you can find the changelog of Truck Explorer since it was posted on our website on 2016-10-12 22:46:03.
The latest version is 7.6.20617 and it was updated on 2024-04-26 18:40:36. See below the changes in each version.
Truck Explorer version 7.6.20617
Updated At: 2024-04-25
Changes: New:
* MAN PTM/FFR gearbox FLEET mode get/set (price 100 tokens)
* Iveco Daily EDC17C49 GPT memory operations
New (minor):
* Volvo EBS2.3 (Knorr) via DC/OBD (only info and faults operations)
* MAN EBS2.3 (Knorr) via DC/OBD (only info and faults operations)
* Connection info for EDC17CV44
* MR hardware type A8b detection added (in BSL mode only)
Fixed:
* Volvo EMS 2.3 FLASH write was fixed
* Connect to Volvo EMS 2.3
* Now we do not check Volvo truck ignition on OBD pin
Truck Explorer version 7.5.20238
Updated At: 2024-02-14
Changes: New:
* UCV/FR (Brazil Mercedes) memory operations via DC (needs "updated" UCV/FR DC2 cable)
* Can change RPM for MBenchLite operations
New ECU versions: MD1CE101 (Iveco) version 4.5.4 (new variant) added
Changes:
* "MBench" renamed to "MBench PLD Lite"
* MBenchLite connect moved from Mercedes to ECU tab
* MBenchLite page was redesigned
Fixed:
* DC1 does not need updates
* missed DAF GS3.6 A and B variants were added to ECU tab
Truck Explorer version 7.5.20107
Updated At: 2024-01-18
Changes: New:
* Scania COO8 JTAG memory operations
* MR in boot mode allows to make BSL memory operations without soldering/opening ECU
* IRRF, MBenchLite updates via app
* Scania EMS S7 and S8 memory operations via DC/OBD
* after reading FLASH show are checksums valid or not
New ECU versions:
* MCM2.1 diagnosis version 00201E
* EDC7UC31 (Volvo Penta) version P800
* MD1CE101 (Iveco) version 8.0.3
Changes: ACM2 and ACM2.1 now has same EEPROM size (32Kb) so we can write ACM2 to ACM2.1 hardware now
Truck Explorer version 7.4.19836
Updated At: 2023-11-14
Changes: New: Scania EMS S7 memory operations via JTAG
New ECU versions: MCM 2.1 diag version 00221B
Changes: JTAG memory write operations are much faster now (for CPC3, CPC3 Evo)
Fixed:
* "data record version" for MCM is readed correctly now
* connect to Scania ECUs in boot mode
* "Detect control units" for Scania via OBD
* EDC7C3 write via BDM was fixed
* EDC17UC31 FLASH write for unknown versions
Truck Explorer version 7.4.19746
Updated At: 2023-10-27
Changes: New
* Scania EMS S8 memory operation via JTAG
* Show "data record version" during connect to MCM
* MAN faults descriptions updated (from latest MAN CATS III)
Changes:
* JTAG memory write operations are much faster now (for TCM, EBS4/EBS3, COO7/COO8, PTM, EMS S8)
* For PTM immo operations use diagnostic algo (all PTM versions should be supported now)
Truck Explorer version 7.4.19527
Updated At: 2023-09-21
Changes: New:
* "Erase emission faults" added (Action tab, needs MB_EXTRA license)
* Volvo EMS 2.2, 2.3 JTAG memory operations
* Volvo EMS 2.2 memory operations via DC (GPT mode; no connection info yet)
* Volvo EMS 2.3 memory operations via DC (GPT mode; works still unstable)
* DAF GS 3.6 BSL memory operations
New (minor): new CPC3 DC2 cable (with EvoBus support)
Truck Explorer version 7.3.19375
Updated At: 2023-08-29
Changes: New:
* Volvo trucks (connect info for main ECUs, faults read/clear for all ECUs)
* GS 3.3 (MAN, DAF, IVECO) BSL memory operation
* Scania OPC5 memory operations via DC/OBD (needs Scania_OPC5 license)
* connect to MR in boot mode (was "error 3.5" error before)
* speed limit for Scania EMS S7 & S8 (was only for EMS S6 before)
* ECU versions: CPC2+ version 4702, FR version 04A0
Fixed:
* Iveco connect via OBD (was "error 0.3" during connection to INS)
Truck Explorer version 7.2.19190
Updated At: 2023-07-26
Changes: What's new:
* CPC3 immo status (classic/FBS3)
* CPC3 immo system change to classic/FBS3
* GS 3.0 (ZF Astronic; Iveco) BSL memory operations
* Instrument cluster (Continental; Iveco) BSL memory operations
New ECU versions:
* CPC version 4400 (diagnosis version 47)
* MCM2.1 diagnosis version 002A1B
Fixed:
* CPC5 speed limit now works for cruise control too
* COO6, some OPC versions (Scania) detection via OBD (was not detected before)
Truck Explorer version 7.2.18980
Updated At: 2023-06-12
Changes: What's new:
* MCM immo off
* Can easily copy last/pointed operation results with "Copy marked" after right click inside Log window
Fixed:
* BSL connect for ST10F276 (CPC & GS2 ECUs) (worked before only with 26V voltage)
* CPC hardware class detection should work ok now (added all known versions from logs)
* update of expired VEI with DC connected (was "license error")
* CPC2+ connect in BSL mode
* Scania EMS S6 speed limit write (was "error 0.3")
Truck Explorer version 7.2.18913
Updated At: 2023-05-26
Changes: What's new:
New ECUs versions: CPC5 diagnostic version 23004, 23009
Fixed:
* TCM (Wabco) version 000C FLASH write (was "dump does not match" error)
* PTM keys information over PTM-EDC7 DC2 Y cable (was "error 3.5")
* CPC hardware class detection when CPC is in boot mode (was always "unknown")
* "Internal error" when switching between VEI devices with different Wi-Fi modes
Disclaimer
Official Google Play Link
We do not host Truck Explorer on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Truck Explorer is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
